I, revamp my Stug

Hello,

anyway, since I currently have to wait for the supply of material, I have begun to modernize the technology of my Stug and maybe it Dernbach on Saturday in the same test drive .

So to say it out early today .





Now I'm the newest version of my brushless drives installed with real inertia. The functions are controlled by a future Beier sound module .

But first I have removed and cleaned the gear . The old engines are no longer necessary.



Since one can not simply drill to 3.17 mm for the new motor shafts , the gears I turn them out with a small rotating steel .



I turn the flywheels made ​​of steel.









So I can then screw the new engines .



This must of course be Balanced . I do this simply by I screw a motor with an old gear cheek to be able to keep it well and then let it rotate between the fingers easily with a controller . So you spührt the finest imbalance which can then compensate with a little practice and epoxy plasticine the imbalance .



And so I can then screw the gear together and be ever in the tub area.

  ciao edwin , un nuovo e interessante progettino da seguire con attenzione ..... soprattutto perche' il modello in qyestione e' uno stug , staro' attento a qualche dettaglio dei lavori , ce' sempre da imparare .... saluti e buona serat robby62 ....  

Today I have aligned the gear as First and mounted with a small pad of 1.5 mm , so they are now a little crooked and inertia can be accommodated .



The next one was then the new wiring the tub, the replacement of the 10A fuse with a 30A fuse , the programming of the new controller and the laying of the cable.







The sound module has first received only a basic setting for the first test drive and is not voted yet , but the drive will behave as it should.



I 've also made ​​a little video while I 'm at the end even unintentionally via the transmitter dangers ....



During my test drive I never go the way Scale . The technique must show what they can and should stand out flaws.

Maybe I'll even the technology of the upper hull rebuild to Saturday.

Compliments